FT 781 0304
Rev.2 - 0810

 

APPLICATIONS

hinges are designed doors 8 to 10 mm thick, especially made of glass. They hold the door firmly without jamming in all positions except a 15° zone on either side of the balanced self-closing position (90°).

hinges are mainly used in bathrooms, shower stalls and separation gates. Their smaller size, bevelled edges and round shaped design distinguish them of the line from which they are issued.

hinges combine a modern design and a traditional mechanism, (patented by in1976).

The line includes 4 hinges models:
- wall/glass (1)
- wall/glass with half wall plate (2)
- glass/glass 180� (3)
- glass/glass 90� (4)

 

1) Wall / glass

2) wall / glass with half wall plate

) glass/glass 180°

) glass/glass 90°

ASSEMBLING

Door :

  • Height x width : 180 cm x 70 cm
  • Thickness : 8 to 10 mm
  • Maximun load: 31 kg/pair (for bigger sizes, refer to "calculation").

 

INSTALLATION

  • Remove the leaves and counterleaves and attach the hinges flat on the doorjamb, making sure they are aligned.
  • Check for the presence of the cork gaskets and install the leaves and counterleaves on the door.
  • slide the clamps onto the cams attached to the doorjamb. Level and staighten the door.
  • Tighten the screws completely (use an Allen wrench). Recommended torque : 0,25 m.kg.
  • Make sure there is no risk of opening the door more than 90° beyond the balanced position. If there is, provide a stop.

FINISH - DECOR

hinges are made of brass and are normally available in four finishes : chrome, matt chrome, gold and white (RAL 9010).
Other finishes are possible, consult
for quantities and lead time.

ACCESSORIES

the accessories for use with doors and gates are included in the catalogue, e.g.:

  • Pull knobs, see family 699,
  • stops, see family 799
  • Wipes and door seals, see family 790
  • PARTS LIST

    PART NUMBER


    DESCRIPTION


    SOLD BY

    MINIDOUCHE hinge wall/glass - chrome-plated brass
    Set of 2
    MINIDOUCHE hinge wall/glass - matt chrome-plated brass
    Set of 2
    MINIDOUCHE hinge wall/glass- gold
    Set of 2
    MINIDOUCHE hinge wall/glass - White (RAL 9010)
    Set of 2
    MINIDOUCHE hinge glass/glass 180° - chrome-plated brass
    Set of 2
    MINIDOUCHE hinge glass/glass 180°- matt chrome-plated brass
    Set of 2
    MINIDOUCHE hinge glass/glass180° - gold
    Set of 2
    MINIDOUCHE hinge glass/glass 90° - chrome-plated brass
    Set of 2
    MINIDOUCHE hinge glass/glass 90° - matt chrome-plated brass
    Set of 2
    MINIDOUCHE hinge glass/glass 90° - gold
    Set of 2
    MINIDOUCHE hinge wall/glass with 1/2 wall plate - chrome-plated brass
    Set of 2
    MINIDOUCHE hinge wall/glass with 1/2 wall plate - matt chrome-plated brass
    Set of 2
    MINIDOUCHE hinge wall/glass with 1/2 wall plate - gold
    Set of 2

     

    Sealing strip with central lip for 8 mm glass thickness
    Lg 2 ,20 m
    Sealing strip with central lip for 10 mm glass thickness
    Lg 2 ,20 m
    Magnetic PVC sealing strip with white magnet :
    for 6/8 mm glass thickness
    - magnetic sealing strip 90� - North
    - magnetic sealing strip 90� - South
    - magnetic strip 180°
     

    Lg 1,95
    "
    Lg 2,20

    790 40P
    790 41Q
    790 09F
    PVC sealing strip with soft grained lips:
    For 6/8 mm glass thickness
    - sealing strip for bottom of door
    - Tubular sealing strip
    - sealing strip with offset lip
     

    Lg 1 m
    Lg 1,95
    Lg 2,20
    raising button, to be glued :
    - chrome
    - matt chrome
    - Polished

    Unit
    "
    "
    raising button, single, to be screwed :
    - chrome
    - mat chrome
    - Polished
    - white

    Unit
    "
    "
    "
    raising button, double :
    - Chrome
    - matt chrome
    - gold
    - white

    Unit
    "
    "
    "

     

LIENS VERS AUTRES SERIES  DE CHARNIERES :
NEW
   
 
 

 

ADLER SAS - Z.A. La Barogne - 9, Av des 22 Arpents - 77230 Moussy le Neuf - France
Tel.: +33 (0)1.60.03.62.00 - Fax :+33 (0)1.60.03.62.49
E-mail : admin1@adler-sa.com